Temperature Sensor for Flow Rate Sensor Separate Type FD-T1

FD-T1 - Temperature Sensor for Flow Rate Sensor Separate Type

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FD-T1
Connected model		FD-MH10A/50A/100A/500A^*1
Display, alarm outputcompatible models		FD-MA1A (P)/MA2A (P)/MA5A (P)
Possible ranges to set		0.1 to +99.9°C (No freezing)
Connection diameter		R3/8 (10A)
Detectable temperature range		0 to 90.0°C (No freezing)^*2
Possible detection fluid		Water or non-corrosive fluid
Display resolution		0.1°C
Display speed		±2.5°C
Display / Output response		5 s ^*3
Hysteresis		1°C fixed^*4
Alarm output		Window settings x1 output
Power/current consumption		2 µW (20 µA) : When using 85°C^*5
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	2.0 MPa
	Applied pressure range	1.0 MPa or less
	Ambient temperature	0 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material		Metal parts : SUS304, Plastic parts : PBT, Cables : PVC, Protective cap : PE
Accessories		None
Weight		Approx. 130 g
^1 The FD-M built-in type cannot be connected. ^2 The operating fluid temperature for the FD-MH Series is "0 to +85°C". Do not use the FD-MH Series with fluid exceeding +85°C. The temperature limit for the sensor part of the FDT1 temperature sensor is 90°C. Although the display shows up to 99.9°C, the temperature sensor may be damaged if it is used over 90°C. ^3 The display/output response is fixed regardless of the FD-MA settings. ^4 Set the hysteresis within the window (enters in the window). ^*5 Consumption power (current consumption) is the value just for the temperature sensor. Power is supplied from the connected model.

Data Sheet (PDF) Other Models