Non-Wetted Electrode Electromagnetic Flow Sensors

FD-M series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Sensor Head 50 L/min - FD-MH50A

Sensor Head 50 L/min FD-MH50

FD-MH50 - Sensor Head 50 L/min

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FD-MH50
Shape		Separate amplifier
Rated flow range		2.5 to 50 L/min^1^2
Possible display range		2.5 to 100 L/min^*3
Connection diameter		Rc3/4 (20A)
Allowable fluid		Water or non-corrosive fluid
Conductivity of detection fluids		5 µS/cm or higher
Detection fluid temperature		0 to +85°C (No freezing)
Pressure loss		0.01 MPa or less
Display power		Bar display (2 colours), other indicators
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	2.0 MPa
	Applied pressure range	1.0 MPa or less
	Ambient temperature	0 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
Material properties	Other parts	Plastic case areas : PBT, Indicator : polyalylate, Metal case areas : SUS430, Cable : PVC
Accessories		Warnings
Weight		Approx. 1,070 g
^1 The rated flow range indicates the range that is supposed to be used in general. ^2 The rated flow range indicates recommended operating range. ^*3 Can be used within the display range as well as within the rated flow range.