Recent Searches
    Series ( results)
      Models ( results)

          Non-Wetted Electrode Electromagnetic Flow SensorsFD-M series


          Sensor Head 100 L/min


          Select Language




          Separate amplifier

          Rated flow range

          5 to 100 L/min*2*3

          Possible display range

          5 to 200 L/min*4

          Connection diameter

          Rc1 (25A)

          Allowable fluid

          Water or non-corrosive fluid

          Conductivity of detection fluids

          5 µS/cm or higher

          Detection fluid temperature

          0 to +85°C (No freezing)

          Pressure loss

          0.01 MPa or less

          Display power

          Bar display (2 colours), other indicators

          Environmental resistance

          Enclosure rating


          Pressure resistance

          2.0 MPa

          Applied pressure range

          1.0 MPa or less

          Ambient temperature

          0 to +50 °C (No freezing)

          Relative humidity

          35 to 85 % RH (No condensation)

          Vibration resistance

          10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions


          Liquid end materials

          Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)

          Material properties

          Other parts

          Plastic case areas : PBT, Indicator : polyalylate, Metal case areas : SUS430, Cable : PVC




          Approx. 1,280 g

          *1 The models with “A” at the end of the name support the amplifier type A. They operate normally even when connecting the conventional amplifier without “A” at the end.
          *2 The rated flow range indicates the range that is supposed to be used in general.
          *3 The rated flow range indicates recommended operating range.
          *4 Can be used within the display range as well as within the rated flow range.

          • High Temperature Sensors
          • For Liquid Level Control

          Process Controls / Process Sensors