Non-Wetted Electrode Electromagnetic Flow Sensors

FD-M series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Main Unit, Landscape, 100 L/min, NPN - FD-M100AY

Main Unit, Landscape, 100 L/min, NPN FD-M100Y

FD-M100Y - Main Unit, Landscape, 100 L/min, NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FD-M100Y
Type		For horizontal piping
Output		NPN output
Shape		Built-in amplifier
Rated flow range		5 to 100 L/min^1^2
Possible display range		5 to 200 L/min^*3
Possible ranges to set		0 to 200 L/min
Zero-cut flow rate		5 L/min^*4
Connection diameter		Rc1 (25A)
Allowable fluid		Water or non-corrosive fluid
Conductivity of detection fluids		5 µS/cm or higher
Detection fluid temperature		0 to +85°C (No freezing)
Pressure loss		0.01 MPa or less
Display power		Dual row display with 4-digit 7-segment LED, bar display (2 colours)
Display resolution		0.1/1 (L/min) selectable
Repeatability		0.5 s : ±5% of F.S., 1 s : ±3.5% of F.S., 2.5 s : ±2.5% of F.S., 5 s : ±1.6% of F.S., 10 s : ±1% of F.S., 30 s : ±0.8% of F.S., 60 s : ±0.6% of FS.^*5
Hysteresis		Variable
Response time (chatter prevention feature)		500 ms/1 s/2.5 s/5 s/10 s/30 s/60 s variable
Accumulated flow unit		0.1/1/10/100/1000 (L) selectable
Accumulation data storage cycle		Save to memory every 10 seconds
Memory backup		EEPROM (Data storage length : min. 10 years, Data read/write frequency : min. 1 million times)
Control output		Maximum NPN open-collector output : 100 mA/ch^*6 (40 V or less)
integration pulse output		Residual voltage : 1 V or less
Analogue output		4 to 20 mA, maximum load resistance 260 Ω Analogue output range can be set arbitrary
Abnormality alarm output		Three outputs (N.O./N.C. switchable)
Integration reset/bank switch input/flow zero function input		Selectable from 2 types, input time : 20 ms or more
Power/current consumption		Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA)
Rating	Power voltage	24 VDC, Ripple (P-P) 10 % or less
Environmental resistance	Enclosure rating	IP65
	Pressure resistance	2.0 MPa
	Applied pressure range	1.0 MPa or less
	Ambient temperature	0 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
Material properties	Other parts	Plastic case areas : PPS, Metal case areas : SUS430, Cable : PVC
Accessories		Instruction manual
Weight		Approx. 1,310 g
^1 The rated flow range indicates the range that is supposed to be used in general. ^2 The rated flow range indicates recommended operating range. ^3 Can be used within the display range as well as within the rated flow range. ^4 Flow under the zero cut flow will be displayed as 0 L/min. ^5 The repeatability is effective within the display range. Convert the F.S. (full scale) listed in the table ac ^6 Maximum 20 mA for alarm output.

Data Sheet (PDF) Other Models