CIP Safety™ Type (with camera) SZ-V32NCX

SZ-V32NCX - CIP Safety™ Type (with camera)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

View Catalogue

Data Sheet (PDF)

Specifications

Model				SZ-V32NCX^*1
Type				CIP Safety™ Type
Detection capability	Minimum detectable object size			Diameter: 20, 30, 40, 50, 70, 150 mm (depends on the setting); Reflectance: 1.8% min.; Speed: 1.6 m/s max.^*2
	Detectable angle			190° (-5° to 185°)
	Response time (ON to OFF)	Standard Mode	Scan Cycle A	160 ms (2 scans) to 1280 ms (16 scans)^3^4
			Scan Cycle B	168 ms (2 scans) to 1344 ms (16 scans)^3^4
			Scan Cycle C	176 ms (2 scans) to 1408 ms (16 scans)^3^4
		High Speed Mode	Scan Cycle A	80 ms (2 scans) to 640 ms (16 scans)^3^4
			Scan Cycle B	84 ms (2 scans) to 672 ms (16 scans)^3^4
			Scan Cycle C	88 ms (2 scans) to 704 ms (16 scans)^3^4
	Response time (OFF to ON)			Response time of ON to OFF + 150 ms
	Protection zone	Minimum detectable object size: 70 / 150 mm		Standard Mode: 8.4 m / High Speed Mode: 5.7 m
		Minimum detectable object size: 50 mm		Standard Mode: 5.6 m / High Speed Mode: 3.8 m
		Minimum detectable object size: 40 mm		Standard Mode: 4.3 m / High Speed Mode: 2.9 m
		Minimum detectable object size: 30 mm		Standard Mode: 2.9 m / High Speed Mode: 2.0 m
		Minimum detectable object size: 20 mm		Standard Mode: 1.6 m / High Speed Mode: 1.1 m
	Warning zone	Minimum detectable object size: 70 / 150 mm		Standard Mode: 26 m / High Speed Mode: 23 m^*5
		Minimum detectable object size: 50 mm		Standard Mode: 25 m / High Speed Mode: 21 m^*5
		Minimum detectable object size: 40 mm		Standard Mode: 24 m / High Speed Mode: 20 m^*5
		Minimum detectable object size: 30 mm		Standard Mode: 23 m / High Speed Mode: 18 m^*5
		Minimum detectable object size: 20 mm		Standard Mode: 21 m / High Speed Mode: 15 m^*5
	Additional safety distance			100 mm^*6
	Maximum measurement distance			60 m^*7
Maximum number of banks				Max. 16 banks
Multiple scanner heads				Max. 3
Camera				Monitor area: over 190° (-5° to 185°)^*8
Display				QVGA 2.2 inch colour LCD
Light source	Type, wavelength			Infrared laser diode, 905 nm
	Laser class	IEC		Class 1 IEC / EN 60825-1
		FDA		Class 1 FDA 21 CFR 1040.10, 1040.11 (Laser Notice No.50)^*9
		JIS		Class 1 JIS C6802
Control output (OSSD output)	Output type			-
	Number of outputs
	Max. load current
	Residual voltage
	OFF-state voltage
	Leakage current
	Max. capacitive load
	Load wiring resistance
Input (safety-related)	PNP
	NPN
Non safety-related output (AUX output)	Output type
	Number of outputs
	Max. load current
	Residual voltage (during ON)
	Muting lamp
Interface	USB			USB 2.0
	Ethernet	Standard		IEEE802.3u (100BASE-TX)
		Transmission rate		100 Mbps
		Cable		Category5 or higher STP (Shielded Twisted Pair) or UTP (Unshielded Twisted Pair) cable
		Connector		RJ45 (IP65 connector) 2 ports
Networking/data output				CIP Safety™, EtherNet/IP™, UDP
Cable length	Power cable			30 m or less^*10
	Connection cable			20 m or less each^*11
	Ethernet cable			100 m or less^*12
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type3 ESPE)
		EMI		EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type3 ESPE), IEC61496-3, EN61496-3 (Type3 AOPDDR), IEC61508, EN61508, EN ISO13849-1:2015 (PLd, Category3), IEC61784-3-3, UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rating	Power consumption			13.4W^*13
	Power voltage			When using a converter power supply: 24 VDC ±10 %, Ripple (P-P) 10 % or less When using a battery: 24 VDC +20 % /-30 %
Environmental resistance	Enclosure rating			IP65 (IEC60529)
	Ambient light			Incandescent lamp: 1,500 lux or less^*14
	Operating ambient temperature			-10 to +50 °C (No freezing)
	Storage temperature			-25 to +60 °C (No freezing)
	Operating relative humidity			35 to 85 % RH (No condensation)
	Storage relative humidity			35 to 95 % RH
	Vibration resistance			10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
	Shock resistance			100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Scanner head	Main unit case		Magnesium
		Window		Polycarbonate, PEI
		Indicator part		Aluminum, PES^*8
	Display unit	case		Magnesium, PPS, Polycarbonate
	System memory			Aluminum, PPE
Weight				Approx. 2,300 g
^1 Integrated models include display unit, scanner head, system memory and a connection cable (SZ-VS005). ^2 If the object to be detected moves perpendicular to the detection plane, SZ-V cannot detect the object moving at speed over 1.6 m/s, regardless of the encoder setting. ^3 The response time, protection zone, and warning zone are affected by the operation mode. ^4 When PROFIsafe is used with the SZ-V32N, 6 ms is added to the response time. ^5 20% or more reflectance is necessary for the minimum detectable object in the warning zone. ^6 If there is a highly reflective background within 1.5 m from the boundary of the protection zone, 200 mm must be added as supplementary necessary distance to the protection zone when calculating the minimum safety distance. ^7 Even when using the network data output, the maximum measured output distance is 60 m. ^8 Only applicable for the type with a camera. ^9 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. ^10 10 m or less when supplying power from a battery. ^11 When supplying power from a battery, the length of each connection cable should be 10 m or less when using two scanner heads, and 5 m or less when using three scanner heads. ^12 Distance between SZ-V and Ethernet switch ^13 When using the SZ-V with series connected sensor heads, it is necessary to add 9.4 W per scanner head. Also, power consumption may temporarily be higher (maximum 3.6 W). Power consumption will be within the specification after SZ-V moves to normal operation. ^14 An ambient light source should not be located within ±5° of the detection plane.

Data Sheet (PDF) Other Models