Controller, PNP Type TM-3001P

Model

TM-3001P

Head compatibility

Compatible

Number of connectable sensors

2 units max.^*1

Display

Minimum display unit

0.01 µm, 0.001 mm², 0.01 °

Maximum display range

±9999.99 mm, ±99999.9 mm², ±99999.9°

Input terminal block

Laser remote interlock input

Non-voltage input^*2

Trigger input (for Head A)

Voltage input^*2

Timing 1 input

Auto-zero 1 input

Reset input

Output terminal block

Analogue voltage output

±10 V x 2 outputs, out put impedance: 100 Ω^*2

Total judgment output

PNP open-collector output^*2

Error output

PNP open-collector output (N.C.)^*2

Process output

PNP open-collector output^*2

Trigger input enable output

Adjusted error output

Expansion connector

Trigger input (for Head A)

Voltage input^*2

Timing 2 input

Auto-zero 2 input

Programme switching input

Voltage input, 4 inputs^*2

Memory card save input

Voltage input^*2

Judgment/Binary output

3-level judgment output: OUT1 to OUT16, total judgment output
Binary output: OUT1 to OUT16 measured data output (21 bits)
PNP open-collector output^*3

Strobe output

PNP open-collector output^*2

Trigger input enable output

Analogue RGB monitor output

SVGA (800 x 600 pixels)

RS-232C interface

Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)

USB interface

In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)

Ethernet interface

1000BASE-T/1000 BASE-TX/10 BASE-T

Memory card

SD card CA-SD4G (4GB), CA-SD1G (1GB) support

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

1 head connected 480mA max./ 2 heads connected 550mA max.

Environmental resistance

Ambient temperature

0 to +50 °C

Relative humidity

35 to 85 % RH (No condensation)

Material

Polycarbonate

Weight

Approx. 1,120 g