Separate amplifier Amplifier unit Main unit (M8 connector type) ER-N11C

ER-N11C - Separate amplifier Amplifier unit Main unit (M8 connector type)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		ER-N11C ^*1
Type		Separate amplifier Amplifier unit Main unit (expansion not supported) (M8 connector type) ^*2
No. of control outputs		2 ^*3
No. of external inputs		1 ^*3
Temperature characteristics		±8% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ^*4
Response time		150 μs ^5/ 300 μs ^5/ 1 ms / 4 ms / 16 ms / 64 ms (switchable)
Network compatibility		IO-Link (Specification v1.1/COM2 (38.4 kbps))
Function	Operation mode	Normal / Magnetic metal / Non-magnetic metal / Hybrid
	Timer function	Timer OFF / Off Delay / On Delay / One Shot / On-Off Delay / On-Delay One Shot
I/O	Control output	Open-collector, 30 VDC or less, PNP/NPN switchable When used as a solitary unit: 100 mA or less for 1 output; 100 mA or less in total for 2 outputs / When used as an expansion unit: 50 mA or less in total for 2 outputs Residual voltage: 1.7 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA)
	External input	Tuning / Detection stop / Zero shift / Hold value reset (switchable) Short-circuit current: 1.5 mA or less; Input time: 3 ms or more ON, 20 ms or more OFF (When tuning is selected: 25 ms or more ON, 25 ms or more OFF)
Additional expansion units		―
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
No. of mutual interference prevention units		―
Power supply	Power voltage	18 to 30 VDC ^*6 (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1110 mW or less (47 mA or less at 24 V, 62 mA or less at 18 V)
Environmental resistance	Ambient temperature	Operation: -25 to +55°C -13°F to +131°F ^*7, Storage: -30 to 70°C -22°F to +158°F (no freezing)
	Relative humidity	Operation/storage: Up to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Case material		Main unit and cover: Polycarbonate, FG terminal: Copper/iron, Sheet metal: Aluminum alloy, M8 connector metal: Nickel-plated brass
Accessories		Instruction manual
Weight		Approx. 55 g 1.94 oz
^1 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^2 Ensure the power cable is no longer than 30 m 98.4' for M8 connector types and no longer than 20 m 65.6' with IO-Link connections. ^3 Output 2 and the external input are selectable. ^4 The value when the operation mode is set to “Normal”, using the 2-point adjust function at a distance of 25% of the stable detection range with no detectable object, and a standard detectable object is placed at a distance of 50% of the stable detection range. ^5 150 μs and 300 μs are selectable only when the operation mode is set to “Normal”. ^6 Use a power voltage of 20 V or more when connecting 4 or more expansion units. ^*7 When 1 or 2 units are added: -25 to +55°C -13°F to +131°F; when 3 to 10 units are added: -25 to +50°C -13°F to +122°F; when 11 to 16 units are added: -25 to +45°C -13°F to +113°F. When using two outputs, one unit is counted as two units. The prescribed values for the operating ambient temperature assume the sensor amplifier is mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

Data Sheet (PDF) Other Models