GT2 series
Amplifier unit type | Appearance/model | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Judgment output
(5 outputs) |
DIN-rail mount type![]() |
Panel mount type![]() |
5-output function | ||||||||||||||||||||
Judges the 5 statuses HH/High/Go/Low/LL | |||||||||||||||||||||||
Bank function | |||||||||||||||||||||||
Registers limit setting values and preset values in up to 4 different groups | |||||||||||||||||||||||
Calculation functions using expansion units | |||||||||||||||||||||||
Enables calculations such as maximum value, minimum value, and degree of flatness | |||||||||||||||||||||||
|
|||||||||||||||||||||||
Analog output
(4 to 20 mA) |
DIN-rail mount type![]() |
3-output function | |||||||||||||||||||||
Judges the 3 statuses High/Go/Low | |||||||||||||||||||||||
Bank function | |||||||||||||||||||||||
Registers limit setting values and preset values in up to 4 different groups | |||||||||||||||||||||||
Calculation functions using expansion units | |||||||||||||||||||||||
Enables calculations such as maximum value, minimum value, and degree of flatness | |||||||||||||||||||||||
|
|||||||||||||||||||||||
Pulse output |
DIN-rail mount type![]() |
Minimum phase difference selection | |||||||||||||||||||||
[0.5/2.5/5/25 μs] Capable of batch output of position information. |
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Large display |
Panel mount type![]() |
Easy operation with a large display and buttons.
Up to 11 sensor heads can be connected using the expansion board. * With only the main body, up to 2 sensor heads can be connected |
|||||||||||||||||||||
|
|||||||||||||||||||||||
Multi-sensor amplifier unit |
DIN-rail mount type![]() |
Up to 5 sensor heads can be connected to 1 amplifier unit
Up to 15 sensor heads can be connected by adding 2 expansion units * A communication unit (DL Series) is required for output. |
|||||||||||||||||||||
|
Downloads
For Your Support