Important Notice Regarding COVID-19 Latest information on delivery and product/application inquiry support
  1. Home
  2. Products
  3. Sensors
  4. Photoelectric Sensors
  5. Amplifier Separate Type Photoelectric Sensor
  6. Models
  7. Amplifier Unit, Main Unit, PNP

Amplifier Separate Type Photoelectric SensorPS-T series

Amplifier Unit, Main Unit, PNP

PS-T1P

SPECIFICATIONS

Select Language

Model

PS-T1P

Type

Main unit

Output

PNP

Response time

500 µs

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED

Timer function

ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)

External calibration input signal

Non-voltage input (contact, solid state)

Control output

PNP:100 mA max. (30 V max.) Residual voltage: 1 V max.

Stability output

PNP:50 mA max. (30 V max.) Residual voltage: 1 V max. *1

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Multiple connections to Expansion units

Up to 16 expansion units can be connected (a total of 17 units)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

35 mA or less

Environmental resistance

Ambient temperature

-10 to +55 °C (No freezing)*2

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Body/Cover: Polycarbonate

Weight

Approx. 75 g (including 2 m cable)

*1 Stability output is only provided by the PS-T1 (P). Stability output for the PS-T2 (P)/T0 is sent from the PS-T1, FS-T1, FS-M1 or FS-R0.
*2 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected.
When 3 to 10 units: -10 to +50 °C (14 to 122 °F)
When 11 to 16 units: -10 to +45 °C (14 to 113 °F)
When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.

  • Free test | Schedule a meeting | More
  • For Beginners Sensor Basics Understanding fundamental - Introduction Guide to Sensors
  • General Catalogue Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Sensors