CCD Laser Micrometer

VG series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Multi-Purpose CCD Laser Micrometer - IG series

Sensor Head VG-036

VG-036 - Sensor Head

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

Data Sheet (PDF)

Specifications

Model		VG-036
Light source	Type	Visible red semiconductor laser
	Maximum output	38 µW
	Wavelength	670 nm
	FDA (CDRH) 21CFR Part 1040.10	Class II Laser Product, Output : 38 µW
	IEC 60825-1	Class 1 Laser Product, Output : 0.2 mW
Measuring area		35 mm
Setting distance		0 to 300 mm
Linearity		±0.1 % of F.S. (F.S. = 30 mm)^1^2
Minimumdisplayable unit		5 µm
Minimum detectable object		0.5 mm dia. opaque material^*3
Repeatability		―^*4
Interface		RS-232C
Monitor output	Output voltage	±7 V
	Impedance	100 Ω
	Response time	―
Controloutput	Control	HI, GO, LO : NPN 100 mA, 40 V max.^*5
Controloutput		―
Controloutput	Response time
Analogue output	Resolution (ripple)	2 mV (number of averaging measurements : 4096)
Resolution		5 µm (number of averaging measurements : 16) Light-receiving element/CCD 5,000 bit, Scan time : 1.3 ms^*6
Self-timing		NPN open collector : 100 mA max., (40 V max.) (one-shot output time : 1.3 ms)^*5
Stability output		NPN open collector : 100 mA max., (40 V max.) (N.C.)^*5
Response time		3.9 ms (number of averaging measurements : 1)
Digital I/O		―
Key input
Control input		- Upper/ Lower limit select input - Auto-zero input - Auto-gain input - Reset input - Laser remote input voltage contact signals - Hold input
Number of CCD pixels		5000bit
Scanning time		1.3ms
Temperature fluctuation		0.01 % of F.S./°C (F.S. = 30 mm)
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	330 mA or less
Environmental resistance	Enclosure rating	IP60
	Ambient light	Incandescent lamp: 1,000 lux or less, fluorescent lamp: 8,000 lux or less^*7
	Ambient temperature	0 to +40 °C
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material		Die-cast aluminum
Weight		Approx. 360 g (transmitter), Approx. 320 g (receiver)
^1 F.S. (= 30 mm) indicates the range resulting from 2.5 mm subtraction from each end of the 35 mm measuring range. ^2 Typical data obtained when the T-to-R distance was 100 mm, the receiver-to-target distance was 50 mm and a knife edge was used to interrupt the laser beam. ^3 Typical data obtained when the T-to-R distance was 100 mm and the receiver-to-target distance was 50 mm . ^4 This is a typical example when the distance between the transmitter and receiver has been set to 100 mm and a knife edge has been used to block light at a position that is 50 mm from the receiver. F.S. = 30 mm displays the measurement accuracy range. ^5 NPN output can easily be converted into PNP output by connecting the optional OP-5148 PNP output converter. ^6 Typical data obtained when the T-to-R distance was 100 mm, the receiver-to-target distance was 50 mm and a knife edge was used to interrupt the laser beam. ^*7 Typical data obtained when the T-to-R distance was 100 mm 3.94", the receiver-to-target distance was 50 mm 1.97" and a knife edge was used to interrupt the laser beam.

Data Sheet (PDF) Other Models