Specs AI-Powered Code Reader SR-X series

Main unit


SR-X300 *1

SR-X300W *1

SR-X100 *5*1

SR-X100W *5*1



SR-X300: Standard type (2.3 megapixels)
SR-X300 + SR-XHR: High-resolution type

Wide-field type (2.3 megapixels)

Standard type (1.4 megapixels)

Wide-field type (1.4 megapixels)



CMOS image sensor

Number of pixels

1920 × 1200

1360 × 1024




Illumination light source

High-intensity red/white LED*3

High-intensity red LED*3

Pointer light source

High-intensity green LED*3

Reading specifications

Supported symbols

2D codes

QR, MicroQR, DataMatrix(ECC200), DMRE, GS1 DataMatrix, PDF417, MicroPDF417,
GS1 Composite (CC-A/CC-B/CC-C), DotCode, Maxi Code, Aztec Code


CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93,
JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal (Japan Postal, IMB)

Minimum resolution

2D codes

SR-X300: 0.024 mm
SR-X300 + SR-XHR: 0.010 mm

0.060 mm

0.024 mm

0.060 mm


0.082 mm

Reading distance

SR-X300: 70 to 1000 mm
SR-X300 + SR-XHR: 32 to 47 mm

50 to 1000 mm

70 to 1000 mm

50 to 1000 mm

Reading field of view

SR-X300: 104 × 65 mm
(at a distance of 300 mm)
SR-X300 + SR-XHR: 12.3 × 7.7 mm
(at a distance of 47 mm)

267 × 166 mm
(at a distance of 300 mm)

74 × 55 mm
(at a distance of 300 mm)

189 × 142 mm
(at a distance of 300 mm)

I/O specifications

Control input

Number of inputs


Input type

Bidirectional voltage input

Maximum rating

30 VDC

Minimum ON voltage

15 VDC

Maximum OFF current

0.2 mA

Control output

Number of outputs


Output type

Photo MOS relay output

Maximum rating

30 VDC

Maximum load current

50 mA or less for 1 output, or 100 mA or less in total for 3 outputs

Leakage current when OFF

0.1 mA or less

Residual voltage when ON

1 V or less


Communication standard

IEEE 802.3-compliant 100BASE-TX

Supported protocols

KV STUDIO, MC protocol, OMRON PLC link

Serial communication

Communication standard


Communication speed

600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Supported protocols

No-protocol, KV STUDIO, MC protocol, SYSWAY


Communication standard

USB 2.0 High Speed compliant


Power voltage

24 VDC +25%/-20%

Current consumption

Approx. 750 mA

Approx. 650 mA

Environmental resistance

Enclosure rating

IP65/IP67 (IEC60529)*4

Ambient temperature

0 to +45°C

Storage temperature

-10 to +50°C

Relative humidity

35 to 85% RH (No condensation)

Storage relative humidity


SR-X300: Approx. 200 g
SR-X300 + SR-XHR: Approx. 225 g

Approx. 200 g

Approx. 180 g

*1 System ROM rewrites: 100000
*2 The focal position can be adjusted automatically during installation or tuning.
*3 LEDs and lamps are classified as shown below according to IEC 62471 (JIS C 7550).
• Exempt group: Objects that do not cause any photobiological damage.
• Risk group 1 (low risk): Objects that do not cause damage that makes constraints on normal actions necessary.
• Risk group 2 (moderate risk): Objects that do not cause damage accompanied by unpleasant feelings and thermal discomfort.
• Risk group 3 (high risk): Objects that cause damage even due to temporary or short-term exposure.
The risk groups for this product are listed below.
Pointer light source (Green): Risk group 1
Illumination light source (Red): Risk group 1
Illumination light source (White), Advance only: Risk group 1
*4 Attach a USB port cover to meet the protective structural specification.
*5 SR-X100 series does not support the AI filter function.

Back to top

Setup software (AutoID Network Navigator)




Operating System

Windows 10 Pro or later, 32 bit/64 bit
Windows 8 Pro or later, 32 bit/64 bit (excluding Windows RT)

Running environment

Processor: 2.0 GHz or better, Memory: 8 GB or more, Free space on hard disk drive: 1 GB or more (free space for saving other data is also required),
DVD-ROM drive: Required during installation, Screen resolution: 1440 × 1080 or higher

*1 .NET Framework 4.6.1 or later must be installed.
*2 Microsoft Visual C++ Redistributable Package (x86) for Visual Studio 2015, 2017, and 2019 must be installed.
*3 Windows, Visual Studio, Microsoft Edge, Internet Explorer, and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Back to top






EtherCAT® communication unit

PROFINET communication unit

Network Specifications

Compatible Networks



Transmission Speed

100 Mbps

Connector Type

M12, 4-pin, female, D-code

network EtherCAT® PROFINET


Conformance Class C

Power Supply Specifications

Connector Type

IN: M12, 5-pin, male, L-code OUT: M12, 5-pin, female, L-code

Power Voltage

24 VDC, -20 to +25%

Allowable Current

V1, V2: Max. 16 A each; Total: 24 A *1

Power Consumption

Approx. 1.6 W

Environmental resistance

Enclosure rating

IP65/67 (IEC 60529)

Ambient temperature

0 to +45°C

Storage temperature

-10 to +50°C

Relative humidity

35 to 85% RH (no condensation)

Storage relative humidity


Approx. 270 g

*1 Use a load of 12 A or less for each of V1 and V2 and a total load of 20 A or less when using OP-88782 to OP-88787 power cables.

Back to top