Barrière immatérielle de sécurité de Type 4

Série SL-V

For Safety and Efficiency in the Workplace
SL-VH1S Configuration Software
Visible/Identifiable Indicator
Edge-to-Edge Detection Zone [World's First]
Super Slim & Super Heavy Duty-IP67 [World's First]
All-In-One - Built-in Controller, EDM, MUTING
Ease of Use
SL-T11R: Type4 Quick Connect Safety Relay Terminal for SL-V
SC-S11: Safety Controller

All-In-One - Built-in Controller, EDM, MUTING

Reduce No. of Parts and Mounting Processes

Compliance with Category 4 Requirements without a Safety Relay Unit

With a built-in external device monitoring function, Category 4 devices can be handled without a safety relay unit. The maximum capacity that can be handled with the OSSD output is a current load up to 500 mA, thus allowing direct driving of external devices*.
* External devices cannot be used if the current during input exceeds 500 mA.

Perform Muting without a Dedicated Controller

The SL-V has built-in muting and interlock functions, so a safety control circuit can be constructed without a dedicated controller. Using the Notification Output, the SL-V status can be sent to an all-purpose PLC.

Conventional

SL-V

State information output

Send the type of error or muting state to a PLC

This function is a function to inform the PLC or other external device (non-safety-related device) of the current state of the safety light curtain. The current state can be identified in real time, so the State Information can be displayed on a touch panel and the state history saved.

State information output