Built-in amplifier photoelectric sensorsPZ-G series
Threaded mount Retro-reflective M12 Connector Type, NPN
M12 connector *2
0.1 to 1 m
1-turn trimmer (230°)
Output： Orange LED,
Open collector output, 30 V max., 100 mA max., Residual voltage： 1 V max.
Reversed polarity, overcurrent protection, surge absorber
Up to 2 units
Threaded models (front M18 part): 1.0 N m max., (side slotted hole part): 0.5 N m max.
10 to 30 VDC, including Ripple (P-P) 10 %
34 mA or less
IEC: IP67/NEMA: 4A, 6, 12/DIN: IP69K
Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
-20 to +55 °C (No freezing)
35 to 85 % RH (No condensation)
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
1,000 m/s2, 6 times in each of the X, Y, and Z directions
Housing, M18 nut(threaded models only)
Glass-fibre reinforced PBT
Glass-fibre reinforced polyamide (PA)
Screw: Nickel-plated iron and zinc, packing: nitrile butadiene rubber (NBR)
Cable (cable models only)
Polyvinyl chloride (PVC)
Connector (connector type with cable only)
Instruction manual, M18 nut x 1 piece (threaded models only)
Threaded connector models: Approx. 15 g
*1 Cable sold separately for connector models/pigtail quick disconnect models. Reflector sold separately for retro-reflective models.