Software to save data stored in the main unit of SK-H050 into a PC in CSV format
Oct. 14, 2014
1.0.3.0
Activate the software to select [Version information].
Then, the version will be displayed.
Windows7/WindowsXP
PC to install SK-H Data Acquisition
Operation of buttons of the main unit is disabled while the main unit is connected to a PC.
Power will not be automatically turned OFF while the main unit is connected to a PC.
Power cannot be supplied from a USB port to SK-H050.
1.Downloading the file
(1)Create a new folder in the hard disc.
Right-click the mouse on the desktop.
Selecting [Folder] in [Create new] on the pull-down will create a [New folder].
Name a [New folder].
(2)Click [Download] in a download page.
[Download file] dialog will appear.
(3)Click [Save] in [Download file].
[Save as] dialog will appear.
(4)Specify the folder created in (1) to saving destination, and click [Save].
SK-H Data Acquision_v1_0_3_0_setup.exe will be downloaded.
2.Installing software
(1)Execute setup.exe that has been downloaded.
[Welcome to the InstallShield Wizard for SK-H Data Acquisition] dialog will appear.
Follow the instruction to install.
(2)Installation is completed if [InstallShield Wizard Completed] dialog is displayed.
1.Connect the main unit to a PC.
Power up SK-H050 to connect with a PC via a USB cable.
Connection will be completed if a message [Connecting] is displayed.
2.Activating the software.
• Select [Start] button of Windows --> [Program] --> [KEYENCE Applications] --> [SK-H Data Acquisition].
Or double-click [SK-H Data Acquisition] icon.
SK-H Data Acquisition will be activated, and a window will be displayed.
3.Select COM Port number.
(1)Open the device manager to check a COM port number.
(1)For Windows7
Click [Start] to right-click [Computer], and select [Properties].
[System] window will be displayed, and select [Device Manager].
(2)For WindowsXP
Click [Start] to right-click [My computer], and select [Properties].
[System Properties] window will be displayed, and select [Hardware] tab.
Select [Device Manager].
Check the COM number of [Silicon Labs CP210x USB to UART Bridge] listed in Ports (COM & LPT).
(In the example in the picture above, the COM number is COM9.)
(2)Select the COM number checked in the pull-down.
4.Saving data
Click [Save], and data saving will start.
After [Loading] window is displayed, [Save as] dialog will be opened.
Save the data under a new file name to click [Save].
Data will be saved as a CSV file.
Clicking [Clear] will erase the data saved in the main unit.