Rechercher l'historique
    Série ( Résultats)
      Modèles ( Résultats)
        Mot-clé

          Barrière immatérielle de sécurité de Type 4

          Série SL-V

          Visible/Identifiable Indicator

          Quickly Recognise the Presence of a Safety Light Curtain

          Know immediately whether the safety light curtain is active

          By using the visible/identifiable indicator, operators can immediately determine whether the safety light curtain is being used, thus preventing situations where the light is accidentally blocked.

          Visible/Identifiable Indicator

          Easy Troubleshooting

          The status of the safety light curtain can be easily determined by the easy-to-see LED indicators.

          During operation

          Normal [During emission]

          Green lights

          During normal operation, there is no interruption in the detection zone.

          Blocked light or misaligned beam axis

          Red lights

          The beam axes are misaligned or dirty, or there is interruption in the detection zone.

          Error occurred

          Red flashing lights

          An error (such as a malfunction in an external device) has occurred.

          During startup

          Wrong wiring

          Red flashing lights

          There is an error due to wrong wiring or similar problems.

          Misaligned beam axes

          Off or red light (part or all)

          The beam axes are misaligned, not due to damage or a similar error.

          3 step adjustment easy beam axis alignment

          Using the visible indicator, beam axis alignment can be performed in just three steps.

          STEP 1: Align the top row

          STEP 1: Align the top row

          The indicators at the top light up when
          the top beam axis is aligned.

          STEP 2: Align the bottom row

          STEP 2: Align the bottom row

          All of the indicators light red when the bottom beam axis is aligned.

          STEP 3: Fine-tune the rotational direction

          STEP 3: Fine-tune the rotational direction

          All of the indicators light green when all of the beam axes are aligned.

          • General Catalogue Request
          • Trade Shows and Exhibitions
          • eNews Subscribe

          Plus de séries correspondant à Barrières Immatérielles de sécurité

          Sécurité