Main Unit, Landscape, 10 L/min, NPN FD-MZ10AYK

FD-MZ10AYK - Main Unit, Landscape, 10 L/min, NPN

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Specifications

Model		FD-MZ10AYK^*1
Type		Horizontal
Shape		Built-in amplifier
Rated flow range		0.14 - 2.60 G/min (0.50 - 10 L/min)^*1
Possible display range		0.14 - 6.35 G/min (0.50 - 30 L/min)^*2
Possible ranges to set		0 - 6.35 G/min (0 - 30 L/min)
Connection diameter		NPT3/8 (10 A)
Allowable fluid		Water or non-corrosive liquid
Conductivity of detection fluids		5 µS/cm or higher
Detection fluid temperature		0 to +85°C (No freezing)
Pressure loss		Max. 1.45 PSI (0.01 MPa)
Display power		Dual row display with 4-digit, 7 segment LED, bar display (2 colours), output indicators, flow indicator
Display resolution		0.01/0.1 (G/min, L/min) selectable
Repeatability		0.5 s : ±5% of F.S., 1 s : ±3.5% of F.S., 2.5 s : ±2.5% of F.S., 5 s : ±1.6% of F.S., 10 s : ±1% of F.S., 30 s : ±0.8% of F.S., 60 s : ±0.6% of F.S.^*3
Hysteresis		Variable
Response time (chatter prevention feature)		0.5 s/1 s/2.5 s/5 s/10 s/30 s/60 s variable
Accumulated flow unit		0.01/0.1/1/10/100 (G, L) selectable
Accumulation data storage cycle		Save to memory every 10 seconds
Memory backup		EEPROM (Data storage length : 10 years or longer, Data read/write frequency : 1 million times or more)
Analogue output		4-20 mA, max. load resistance 260Ω, Analogue output range can be set to any value
Integration reset/bank switch input/flow zero function input		Input time : 20 ms or greater,Select either the accumulation output or the accumulation pulse by setting the mode
Power/current consumption		Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA)
Rating	Power voltage	24 VDC, Ripple (P-P) 10 % or less, Class 2
Environmental resistance	Enclosure rating	IP65
	Pressure resistance	290 PSI (2.0 MPa)
	Applied pressure range	Max. 145 PSI (1.0 MPa)
	Ambient temperature	0 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
Material properties	Other parts	Plastic case areas : PPS, Metal case areas : SUS430, Cable : PVC
Accessories		Instruction Manual, Connector cable (2.7 m)
Weight		Approx. 865 g
^1 The rated flow range indicates recommended operating range. ^2 Can be used within the display range as well as within the rated flow range. ^*3 The repeatability for FD-MZ10ATK (P)/YK (P) in the range of 5.20 to 7.50 G/min (20 to 30 L/min) is the double of the value listed in the table. The repeatability is the error of the detection point when fluids flow repeatedly under the same conditions.

Data Sheet (PDF) Other Models